PowerPac Washing Machine 3.0KG

Specifications

• Brand Origin: China
• Power: 200W
• Valid Capacity: 3kg
• Dimension (cm): 58 L X 36 W X 58 H

The Rinse Cycle

• When water has completely drained from the Water Outlet Pipe, lift up the @ Cover, remove the clothes from the Wash Tub and transfer them to the Spin Tub. Ensure that the clothes are evenly distributed (as far as possible) within the Spin Tub in order to minimise vibrations which may emanate from the appliance if the Spin Tub is spinning with clothes unevenly distributed. Press the clothes down firmly and place the Safety Cap on top of them. Close the @ Cover.
• (DO NOT be alarmed when you notice these vibrations. As clothes can never be completely evenly distributed, vibrations can never be fully eliminated as when an object spins about its axis of rotation, if that object is unevenly distributed in terms of mass, its center of mass would move around, resulting in wobbles. In addition, as water is removed from the clothes due to the spinning action, the movement of water within the appliance itself would cause the center of mass to move around, resulting in further wobbles.)
• Turn the Spin Timer Knob to select the duration of the spin cycle (up to 5 minutes) based on the type and amount of clothes.
• The Spin Cycle commences. When this is operating, water is automatically discharged through the Water Outlet Pipe. When the Spin Cycle concludes (Spin Timer Knob reaches "0"), the appliance stops operating.
• Turn the R Drain Selector Knob (OFF/Drain) to "OFF".
• Put the Water Outlet Pipe upright again.
• Turn on the external water tap to fill water into the R Wash Tub up to the level desired and turn off the tap. DO NOT overfill water in the appliance.
• Lift up the R Cover. Remove the clothes from the Spin Tub and transfer them to the Wash Tub. As clothes begin to fill the tub, the water level may decrease. Put in more water if necessary, the amount of which would commensurate with the amount of clothes to be washed. Ensure that the clothes are evenly distributed (as far as possible) within the Wash Tub. DO NOT overfill water in the appliance. Remove the water hose from the Water Inlet. Close the @ Cover.
• Turn the R Wash Timer Knob to select the duration of rinsing (up to 15 minutes) based on the type and amount of clothes to be rinsed.
• The appliance starts operating. When the Rinse Cycle concludes (@Wash Timer Knob reaches "0"), the appliance stops operating.
• Lay down the Water Outlet Pipe on the ground and make sure water can flow out horizontally or downwards out of the Wash Tub.
• Turn the Drain Selector Knob (OFF/Drain) to "Drain".
• When water has completely drained from the Water Outlet Pipe, if you wish to remove the clothes from the appliance without undergoing the Spin Cycle, switch off and unplug the power cable from the electric mains holding it firmly with dry hands. Lift up the
  Cover and remove the clothes from the Wash Tub. Otherwise,
  proceed to step 25.

The Spin Cycle

• If a Spin Cycle is required, lift up the @ Cover, remove the clothes from the Wash Tub and transfer them to the Spin Tub. Ensure that the clothes are evenly distributed (as far as possible) within the Spin Tub in order to minimise vibrations which may emanate from the appliance if the Spin Tub is spinning with clothes unevenly distributed. Press the clothes down firmly and place the Safety Cap on top of them. Close the @ Cover.
• (DO NOT be alarmed when you notice these vibrations. As clothes can never be completely evenly distributed, vibrations can never be fully eliminated as when an object spins about its axis of rotation, if that object is unevenly distributed in terms of mass, its center of mass would move around, resulting in wobbles. In addition, as water is removed from the clothes due to the spinning action, the movement of water within the appliance itself would cause the center of mass to move around, resulting in further wobbles.)
• Turn the Spin Timer Knob to select the duration of the spin cycle (up to 5 minutes) based on the type and amount of clothes.
• The Spin Cycle commences. When this is operating, water is automatically discharged through the Water Outlet Pipe. When the Spin Cycle concludes (Spin Timer Knob reaches "0"), the appliance stops operating.
• Switch off and unplug the power cable from the electric mains holding it firmly with dry hands before lifting up the Cover and removing the clothes from the Spin Tub.
• Always remember to unplug the power cable of the appliance if it is NOT used for a long period, before storing, cleaning or performing any maintenance operation.

How to Clean

1. Turn the @ Drain Selector Knob (OFF/Drain) to "OFF".
2. Ensure that the R Water Outlet Pipe is upright so that water is unable to flow out of the appliance.
3. Insert a water hose connected to an external water tap into the Water Inlet of the appliance.
4. Turn on the external water tap to fill water into the @ Wash Tub just below the maximum level and turn off the tap.
5. Plug the power cable into the electric mains holding it firmly with dry hands and switch it
   on.
6. Lift up the @ Cover and put four cups of white vinegar directly into the water in the Wash Tub. Close the @ Cover.
7. Set the @ Wash Timer Knob to "1 minute" to mix the vinegar and the water thoroughly. Let the mixture sit in the Wash Tub for about an hour.
8. Turn the R Wash Timer Knob to select *15 minutes".
9. The appliance starts operating. While you wait, you can tackle the rest of the appliance's surfaces. Spritz vinegar onto a microfiber cloth and rub along every square inch of your appliance. When the Wash Cycle concludes (@Wash Timer Knob reaches "0"), the appliance stops operating.
10. Lay down the R Water Outlet Pipe on the ground and make sure water can flow out horizontally or downwards out of the Wash Tub.
11. Turn the @ Drain Selector Knob (OFF/Drain) to "Drain".
12. When water has completely drained from the Selector Knob (OFF/Drain) to "OFF".
    Water Outlet Pipe, turn the @ Drain
13. Put the Water Outlet Pipe upright again so that water is unable to flow out of the appliance.
14. Turn on the external water tap to fill water into the @ Wash Tub just below the maximum level and turn off the tap.
15. Lift up the Tub. Cover and pour in a cup of baking soda into the water in the @Wash
16. Turn the @ Wash Timer Knob to select "15 minutes".
17. The appliance starts operating. When the Wash Cycle concludes, the appliance stops operating.
18. Lay down the @ Water Outlet Pipe on the ground and make sure water can flow out horizontally or downwards out of the @ Wash Tub.
19. Turn the @ Drain Selector Knob (OFF/Drain) to "DRAIN".
20. Switch off and unplug the power cable from the electric mains holding it firmly with dry hands.
21. Remove the water hose from the Water Inlet.

Note:

• Do Not wash pure woolen fabrics in this appliance. DO NOT wash electric blankets or put in any electrical device in this appliance.
• The appliance starts operating. When the Wash Cycle concludes (@ Wash Timer Knob reaches "0"), the appliance stops operating.
• Lay down the Water Outlet Pipe on the ground and make sure water can flow out horizontally or downwards out of the Wash Tub.
• Turn the @ Drain Selector Knob (OFF/Drain) to "Drain".
• When water has completely drained from the Water Outlet Pipe, if you wish to remove the clothes from the appliance without undergoing the Rinse or Spin cycles, switch off and unplug the power cable from the electric mains holding it firmly with dry hands. Remove the water hose from the Water Inlet before lifting up the @ Cover and removing the clothes from the Wash Tub. Otherwise, proceed to step 13.