PowerPac USB Fan with Oscillation

Specifications

• Brand Origin: China
• Voltage: DC5V
• Power: 5Watts
• Dimension (cm): 15 L X 15 W X 20.5 H

How to Use

• Insert the DC Plug of the USB cable directly into the DC Port on the appliance.
• Insert the Type-A plug of the USB cable into the USB Port of the charging device. DO NOT use a USB Port if it does not fit the USB Type-A plug snugly.
• To turn ON
• Press the ON/OFF Button. Pressing the SPEED Button continuously will advance the speed settings from 1 (Low), 2 (Medium) to 3 (High) in a loop.
• The appliance has 90 degree adjustable tilt head. To adjust the angle of the fan, rotate the Front Grille upwards or downwards.
• (optional) Press the OSCILLATION Button on the Control Panel to make the fan oscillate side to side, sweeping an arc across the room. To stop the fan oscillating, press the OSCILLATION Button again.
• To turn OFF
• Press the ON/OFF Button on the Control Panel to switch off the appliance.
• Detach the DC Plug of the USB cable from the DC Port on the appliance.
• Detach the Type-A plug of the USB cable from the USB Port of the charging device.

HOW TO CLEAN

• Switch the appliance OFF. Detach the DC Plug of the USB cable from the DC Port on the appliance; and the Type-A plug of the USB cable from the USB Port of the device. Wait for the appliance to cool down completely.
• To disassemble
• Unscrew the 3 screws that hold the grilles together. DO NOT lose the 3 screws. This operation detaches the Front Grille from the Back Grille.
• Turn the Front Grille upwards and then anti-clockwise. Pull out the Front Grille.

• Clean the exterior parts of the fan including the Front Grille, Back Grille and Fan Blade thoroughly with warm water & dish-washing agent and a soft cloth, and immediately wipe dry. You may wash the detached Front Grille under running water.
• Do not apply concentrated cleaning agents such as heavy oxidants, bleach, chlorinated solvents, gasoline, thinners, or benzene or the like to any part of this appliance as a cleaner. Never run water over the appliance as malfunctions may occur if water seeps inside the appliance.
• Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet.
• To assemble
• Align the Front Grille above the Back Grille and then turn anti-clockwise. Push the Front Grille downwards.
• Screw the 3 screws to attach the Front Grille to the Back Grille.